How to Overcome the “Reboot and Select Proper Boot Device” Problems on an ASUS Laptop

Posted on 233 views

How to Overcome the “Reboot and Select Proper Boot Device” Problems on an ASUS Laptop

There are many problems that can haunt computer users, including laptops. And one of them is the failure to enter Bootable (Operating System).

This problem also has many types and conditions. One of them, there is a stop at a condition and the message “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device” appears.

Reboot and Select Proper Boot Device

Especially for this problem, it usually occurs because the problem of the computer cannot read the operating system or bootable partition that is used. This can be caused by many things, from damage to the hard disk (HDD) or errors in the Boot settings in the BIOS.

Read Also :

To overcome this, there are several ways that must be done. And specifically for ASUS device users, here are three ways to overcome these problems.

How to solve the “Reboot and Select Proper Boot Device” problem on ASUS Laptop

Make sure the device reads the hard drive

The first step that can be done to overcome the problem of “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device” on an ASUS laptop is to enter the BIOS and check whether the hard drive is read or not.

RECOMMENDED FOR YOU  How to Install Google Camera in Realme 5 Pro

Turn on or restart the laptop if it is turned on by pressing the CTRL + ALT + DEL button, and quickly press the F2 key to enter the BIOS. After logging in, open the Boot section and make sure the hard drive appears in the Boot Option Priority option.

Keep in mind, you can use the directional and enter keys to navigate in BIOS mode because most of these modes do not support navigation using the mouse.

Reset BIOS Settings to Manufacturer Settings

If the hard drive option appears in the Boot Option Priority option, it means that the condition of the hard disk is normal. For this reason, to be able to read as before, you can adjust the choice of OS type (UEFI or Legacy) according to the OS used.

You can set it manually, but we recommend doing it by resetting the manufacturer’s settings. The trick, you only need to restart and press the F9 key.

Clean Hard Drive Port

If the hard drive is unreadable in the first step, you can remove the hard drive from the laptop and then clean the port, either on the laptop or on the hard drive itself. If it is, reinstall it.

Bring it to the experts

If the above method has not resolved the problem of “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device” on your ASUS laptop, then it’s a good idea to bring it to a repairman. Who knows, the hard drive really needs to be replaced.

RECOMMENDED FOR YOU  Easy Way How to Change Fonts for Realme 6 and 6 Pro

Read Also :

Best Choice Laptops for Graphic Designers in 202

The graphic design profession is a profession that is mushrooming nowadays. Many companies, both large and startup companies, have employees who specialize in graphic design. This is also suspected by the proliferation of graphic design majors or the like on campus, even in vocational schools…

Leave a Reply

Your email address will not be published. Required fields are marked *